TPS73701DCQG4 |
RFQ for TPS73701DCQG4 Required Field |
 |
| Technical/Catalog Information | TPS73701DCQG4 |
| Vendor | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Regulator Type | Single Output |
| Package / Case | SOT-223 (5 leads + Tab) |
| Packaging | Tube |
| Regulator Topology | Positive Adjustable |
| Current - Output | 1A |
| Voltage - Output | 1.2 ~ 5.5 V |
| Operating Temperature | -40°C ~ 125°C |
| Voltage - Input | 2.2 ~ 5.5 V |
| Number of Regulators | 1 |
| Current - Limit (Min) | 1.05A |
| Current Short Circuit (Isc) | 450mA |
| Drawing Number | 296; 4202109; DCQ; 6 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | TPS73701DCQG4 TPS73701DCQG4 |
| Product | Manufacturers | Pack | D/C |
| TPS73701DCQG4 | - | - | 07+ |
The TPS737xx family of linear low-dropout (LDO) voltage regulators uses an NMOS pass element in a voltage-follower configuration. This topology is relatively insensitive to output capacitor value and ESR, allowing a wide variety of load configurations. Load transient response is excellent, even with a small 1.0F ceramic output capacitor. The NMOS topology also allows very low dropout for the die size used.
The TPS737xx family uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 1A and ideal for portable applications. These devices are protected by thermal shutdown and foldback current limit.
Typical Application |
Features |
| · Point of Load Regulation for DSPs, FPGAs, ASICs, and Microprocessors· Post-Regulation for Switching Supplies· Portable/Battery-Powered Equipment | ` Stable with 1.0F or Larger Ceramic Output Capacitor` Input Voltage Range: 2.2V to 5.5V` Ultra-Low Dropout Voltage: 130mV typ at 1A` Excellent Load Transient Response-Even With Only 1.0F Output Capacitor` NMOS Topology Delivers Low Reverse Leakage Current` 0.5% Initial Accuracy` 3% Overall Accuracy Over Line, Load, and Temperature` Less Than 20nA typical IQ in Shutdown Mode` Thermal Shutdown and Current Limit for Fault Protection` Available in Multiple Output Voltage Versions Adjustable Output: 1.20V to 5.5V Custom Outputs Available Using Factory Package-Level Programming |
| TPS736xx | UNIT | |
| VIN range | -0.3 to 6.0 | V |
| VEN range | -0.3 to 6.0 | V |
| VOUT range | -0.3 to 5.5 | V |
| Peak output current | Internally limited | |
| Output short-circuit duration | Indefinite | |
| Continuous total power dissipation | See Dissipation Ratings Table | |
| Junction temperature range, TJ | -55 to +150 | °C |
| Storage temperature range | -65 to +150 | °C |
| ESD rating, HBM | 2 | kV |
| ESD rating, CDM | 500 | V |
